Description

EMG-01B – Electromagnetic Drive Test Device

8-Stage Capacitor-Augmented Linear Accelerator

In Stock · Ships within 7 days


Product Status



Item Information
Stock Status In Stock
Shipping Time Ships within 7 days
Version Beta Engineering Test Version
Color Black

Please note:

  • User acknowledgement form may be required prior to shipment

  • Current version: Single-shot mode (one acceleration cycle per trigger pull)


What's In The Box



Component Quantity
EMG-01B Main Unit (Black) 1
6S LiPo Battery 1
18-Round Magazine (MG18) 1
40A Fuse 1

Not included: Dedicated charger, standard test media (0.25×0.75" steel dowel pins)


Intended Use

This device is designed for industrial / research & development purposes, including:

  • Electromagnetic acceleration technology demonstration

  • Material impact testing (non-standard applications)

  • High-speed projectile dynamics experimentation

This is not a consumer product. It is intended for users with experience in electrical and high-voltage systems.


Test Performance Data (Engineering Environment)

The following data was recorded under controlled conditions using standard test media. Results are for technical reference only.



Test Scenario Recorded Result
Standard ceramic tile (10mm) Structural fracture at 6 meters
8mm steel ball → wood target Surface indentation depth ~0.8mm at 5 meters
Ceramic flower pot (20mm wall thickness) Complete structural failure at 15 meters

The above results represent maximum output capability under specific conditions. Users should carefully evaluate target media and safety boundaries before operation.


Technical Specifications



Specification Detail
Primary power source 1× 6S LiPo / 25.2V
Power supply system Proprietary high-voltage bus (2,000W)
Energy storage 10× 33mF low-voltage electrolytic capacitors
Switching elements 8× IGBT
Standard test media 0.25×0.75" carbon steel dowel pin, approx. 4.6g
Magazine capacity 18 rounds (standard)
Firing mode Single-shot per trigger pull
Muzzle velocity Approx. 46 m/s
Muzzle energy Approx. 4.87J
Efficiency 6.7%

Projectile Compatibility

The EMG-01B is configured to accelerate only 0.25×0.75" steel dowel pins.



Projectile Type Compatibility
2575 Magnetic Armatures Recommended by manufacturer
0.25×0.75" steel dowel pins Compatible (standard hardware)

FCC Compliance

This device is exempt from FCC certification under Section 15.103(h):

"Digital devices in which both the highest frequency generated and the highest frequency used are less than 1.705 MHz and which do not operate from the AC power lines..."

Note: Devices that include battery eliminators, AC adaptors, or chargers that permit operation while charging do not fall under this exemption.


Safety Notice – Read Before Purchase

⚠️ HIGH POWER DEVICE – INDUSTRIAL USE ONLY

The EMG-01B has demonstrated significant output capability in controlled testing:

  • 10mm ceramic tile fracture at 6 meters

  • Wood surface indentation from 8mm steel ball at 5 meters

  • 20mm ceramic pot structural failure at 15 meters

  • Not a consumer product. Not suitable for persons under 18 years of age.

  • User acknowledgement form may be required prior to shipment.

  • Always use appropriate protective equipment.

  • Never direct at humans, animals, or any valuable property.

  • Disconnect battery when not in use. Store without test media.


After-Sales Support



Support Type Details
Warranty Refer to user manual
Spare Parts Available (contact support)
Technical Support Email for assistance

📦 In Stock · Ships within 7 days

Night Devil EMG-01B – 8-Stage Linear Accelerator for Material Testing

Product form

$1,499.00

    • Guaranteed secure & safe checkout.

      shop pay
    • Shipped today? Order within: Jun 05, 2026 23:59:00 -0500
    • Free shipping on all orders above 500
    • No hassle returns, 30 days return

    Description

    EMG-01B – Electromagnetic Drive Test Device

    8-Stage Capacitor-Augmented Linear Accelerator

    In Stock · Ships within 7 days


    Product Status



    Item Information
    Stock Status In Stock
    Shipping Time Ships within 7 days
    Version Beta Engineering Test Version
    Color Black

    Please note:

    • User acknowledgement form may be required prior to shipment

    • Current version: Single-shot mode (one acceleration cycle per trigger pull)


    What's In The Box



    Component Quantity
    EMG-01B Main Unit (Black) 1
    6S LiPo Battery 1
    18-Round Magazine (MG18) 1
    40A Fuse 1

    Not included: Dedicated charger, standard test media (0.25×0.75" steel dowel pins)


    Intended Use

    This device is designed for industrial / research & development purposes, including:

    • Electromagnetic acceleration technology demonstration

    • Material impact testing (non-standard applications)

    • High-speed projectile dynamics experimentation

    This is not a consumer product. It is intended for users with experience in electrical and high-voltage systems.


    Test Performance Data (Engineering Environment)

    The following data was recorded under controlled conditions using standard test media. Results are for technical reference only.



    Test Scenario Recorded Result
    Standard ceramic tile (10mm) Structural fracture at 6 meters
    8mm steel ball → wood target Surface indentation depth ~0.8mm at 5 meters
    Ceramic flower pot (20mm wall thickness) Complete structural failure at 15 meters

    The above results represent maximum output capability under specific conditions. Users should carefully evaluate target media and safety boundaries before operation.


    Technical Specifications



    Specification Detail
    Primary power source 1× 6S LiPo / 25.2V
    Power supply system Proprietary high-voltage bus (2,000W)
    Energy storage 10× 33mF low-voltage electrolytic capacitors
    Switching elements 8× IGBT
    Standard test media 0.25×0.75" carbon steel dowel pin, approx. 4.6g
    Magazine capacity 18 rounds (standard)
    Firing mode Single-shot per trigger pull
    Muzzle velocity Approx. 46 m/s
    Muzzle energy Approx. 4.87J
    Efficiency 6.7%

    Projectile Compatibility

    The EMG-01B is configured to accelerate only 0.25×0.75" steel dowel pins.



    Projectile Type Compatibility
    2575 Magnetic Armatures Recommended by manufacturer
    0.25×0.75" steel dowel pins Compatible (standard hardware)

    FCC Compliance

    This device is exempt from FCC certification under Section 15.103(h):

    "Digital devices in which both the highest frequency generated and the highest frequency used are less than 1.705 MHz and which do not operate from the AC power lines..."

    Note: Devices that include battery eliminators, AC adaptors, or chargers that permit operation while charging do not fall under this exemption.


    Safety Notice – Read Before Purchase

    ⚠️ HIGH POWER DEVICE – INDUSTRIAL USE ONLY

    The EMG-01B has demonstrated significant output capability in controlled testing:

    • 10mm ceramic tile fracture at 6 meters

    • Wood surface indentation from 8mm steel ball at 5 meters

    • 20mm ceramic pot structural failure at 15 meters

    • Not a consumer product. Not suitable for persons under 18 years of age.

    • User acknowledgement form may be required prior to shipment.

    • Always use appropriate protective equipment.

    • Never direct at humans, animals, or any valuable property.

    • Disconnect battery when not in use. Store without test media.


    After-Sales Support



    Support Type Details
    Warranty Refer to user manual
    Spare Parts Available (contact support)
    Technical Support Email for assistance

    📦 In Stock · Ships within 7 days

    Returns & Delivery

    When will my order be delivered?

    We ship worldwide. Your order will be packaged really carefully and delivered wherever you want. Delivery takes between 10-20 business days. You will receive an e-mail after ordering with more information about the delivery.

    Can I return my product?

    Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

    What can I do if my item (or part of it) is damaged?

    We work hard to deliver your items without damage. Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

    Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account