Description
Machine Introduction:
Actual power specification: Output light power 120 watts, Electrical power 240 watts
Size: Length 36CM, Diameter 6CM (7CM at the lens)
Main unit 21CM, Lens rotates 14-25CM
Weight: Approximately 1.3 kilograms
Lens: The lens is equipped with a custom laser-coated lens with a magnification of 50 times. The lens can extend from 14 to 25 cm. It has M42 and M22 threaded interfaces.
Heat dissipation: The aluminum alloy heat sink and fan provide forced cooling. The central hole in the main unit enhances air circulation and improves the heat dissipation effect.
Battery: Utilizes 4 5000mAh 21700 lithium batteries with 12C high-rate charging capability, featuring a cycle life of 1000 times.
Battery life: Approximately 2 hours of continuous use on full charge, and around 1 hour for intense operation.
Machine lifespan: Under normal use, it can last for 3 to 5 years without any problem. For civilian use, we can basically ignore the lifespan issue. It's quite difficult to break it before reaching the expected lifespan.
The machine has pre-drilled holes for the brackets, and you can purchase and install them yourself.
After-sales service: One-year warranty. After one year, repairs will be at cost price. For any quality issues, refunds or replacements are guaranteed.
Accessory package: Main unit + lens + battery + charger
Function Introduction:
Coaxial Aim: Red dot for coaxial auxiliary aiming. There may be a certain error at long distances.
Laser Activation: Press and hold for 15-30 seconds. Overheating protection will automatically activate. After the device cools down, it can be used again.
Actual test results: 10 meters within can be pierced with a Red Bull can, 10-20 meters can be punctured with paper. The maximum range for full battery is 20-25 meters for ignition. Video of actual test results can be contacted with the customer service.
Notes:
Do not use other devices' chargers for charging.
When using, be aware of safety.
White objects and transparent items are less likely to absorb light and are not easy to ignite.
After testing, use water to extinguish the tested object to prevent re-ignition.
For long-distance testing, when the device is fully charged, do not shake it; otherwise, it may cause the device to fail to ignite.
