3D-Printed Air Drift Boat (Swamp Boat) | PETG Hull, Vector Steering, High-Speed & Unsinkable Design

The complete set of products is ready to play as soon as you get them.

The complete set of products is ready to play as soon as you get them.

The complete set of products is ready to play as soon as you get them.

The complete set of products is ready to play as soon as you get them.

Product Description (For Product Page)

(Product Hero Section – Brief Overview)

Built to Drift. Engineered to Thrill.
Unleash pure adrenaline with this aerodynamic, 3D-printed air-drift machine. Crafted from durable PETG, it combines a feather-light weight with an ultra-low center of gravity, enabling razor-sharp handling, insane drift angles, and blistering speed—all with near-unsinkable stability. Whether you’re carving across a pond or sliding through a swampy corner, this boat redefines RC waterborne fun.

(Key Features Bullet Points)

• PURE DRIFT & SPEED DYNAMICS: An ultra-low center of gravity and lightweight 3D-printed PETG hull allow for controllable, high-speed drifts and tight pivot turns with exceptional stability.

• ADVANCED AERODYNAMIC HULL: Features a front stepped plane and a rear V-tail designed to cut through the air with minimal drag, translating motor power directly into explosive speed.

• PRECISE VECTOR STEERING: Equipped with a 9g metal gear servo for immediate and responsive vectored thrust control, offering unmatched agility.

• POWER-READY PLATFORM: Optimized for a 2212 2300KV motor with a 6-inch prop on 3S or 4S 21700 batteries, delivering massive power and long run times.

• PRACTICAL COOLING & SAFETY: Designed with a water-cooling intake for a bi-directional ESC (recommended). The sealed hatch and low CG make it highly resistant to taking on water, even if flipped.

(Detailed Description Sections)

The Physics of Fun, Perfected
This boat isn’t just fast; it’s intelligent. The 3D-printed construction allows for a complex, rigid monocoque structure that is significantly lighter than traditional wooden hulls. This reduced weight, combined with the clever mass distribution, means more power goes to speed and handling rather than pushing weight. The result is a boat that feels telepathically connected to your controls.

Unmatched Versatility on the Water

• For the Speed Demon: Unleash raw straight-line speed with a 4S setup.

• For the Drift King: Exploit the low CG and vector thrust to hold endless, stylish slides.

• For the Leisure Cruiser: Enjoy nimble, stable handling at lower speeds for relaxed exploration.

Technical Specifications & Setup

• Dimensions: Length ~50cm | Width ~22cm

• Hull Material: PETG, 3D-printed, epoxy-sealed for strength and waterproofing.

• Steering: Vector (Thrust Vectoring)

• Recommended Power System:

  • Motor: 2212 2300KV Brushless

  • Prop: 6-inch

  • Battery: 3S or 4S 21700 LiPo

• Water Cooling: Integrated rear inlet. Use a plug if not using a water-cooled ESC.

• Key Note: Motor wires often require extensions or soldering to reach the ESC location.

What’s Included:

• 1x 3D-Printed & Epoxy-Sealed PETG Boat Hull with Hatch

• 1x 9g Metal Gear Servo (for vector steering)

• All necessary hardware, linkages, and mounting brackets

• Water cooling tube (for use with water-cooled ESC)

What You NEED to Provide (Not Included):

• Essential Electronics: 2212 2300KV Motor, Bi-directional Water-Cooled ESC (Highly Recommended), Radio System, Propeller, Battery.

• Consumables: Threadlocker, sealant for the motor wire entry point.

⚠️ Pro Tips for Maximum Performance & Durability

1. Seal the Motor Wires: For absolute waterproofing, carefully seal the point where the motor wires enter the hull. This is the #1 step to ensure a dry bilge.

2. Use a Bi-Directional ESC: This is strongly recommended. It allows reverse thrust to back out of tight spots and provides active braking for control.

3. Start on 3S: If you’re new to high-performance boats, begin with a 3S battery to master the handling before unleashing 4S power.